![]() Both quantitative and qualitative analyses are presented by manufacturers, by region & country, by Type and by Application. If backlight button isn't pressed the standard firmware will boot from the internal SD.Note: You can modify your existing Android image for Glo, to use it as extSD for Dual boot, by adding (and replacing) the files of the attached " Android 2".The fix for the "Back" button is included.This report is a detailed and comprehensive analysis for global Reader Security Chip market. If you press the backlight button when the device turns on then Android will boot from the external SD card which was created earlier. During the upgrade will be created backup, so be prepared for a long wait.Īfter the device will reboot you will be able to choose which system to boot. Then the device will be upgrading and rebooting. Next you need to safely unmount and disconnect the device from the computer. Connect your device to your computer through USB and unzip dualboot-android-******.zip to the folder named. Now you have to download the main patch for AuraHD, Glo and Touch. Creating a backup is a long process, it took me about 15 minutes. Connect your device to your computer through USB and unzip fix-udev-tgz.zip to the folder named. You need to install this patch (fix-udev-tgz.zip), otherwise the device won't see the external card, which will be used to save the backup. First we create a backup internal SD card. Now you are ready to install the patch that lets you run Android from the external SD. After you create the card you'll need to delete the folder. You can use micro SD card up to 32GB, you only need to move the last two partitions to the end of the card and extend the first partition. To create a SD card from this image you need Flash Drive Image Writer and at least 8GB miсroSD card. The first thing you need to download the SD card image with Android for AuraHD, Glo, or Touch. The links for the Glo and Touch files are at the comments. įor the AuraHD the instructions are here. Xtra Note: I couldn't make "Image writer" to work on WinXP, so I used RMPrepUSB. After that you can uninstall Tolino reader. Note 2: You need Tolino reader to connect to PC, so before uninstalling it, as embryo advised get program "Auto Mount Your SD Card". Note 1: Alreader which comes with the Android image above is outdated, newest one you can get from here: To connect AndroKoboGlo to PC you will need a driver - get it from here: įor driver installation in Windows 8 fxp33 advised to do the following:Ĭlick the : 2_vendor_id.bat before doing 3_install_su.bat ![]() If you do not like blinking LED, switch it off as per instructions from here: Insert there your SD card with Android image into KoboGlo. Remove SD card from KoboGlo and put it into safe place. Switch off your Kobo Glo and open it as per instructions from here: If your card is bigger than 2GB, you can expand partition which is Fat32 to fill all your card space with this program: Insert blank SD card into card reader and put Android image to your card. Download the working Android image from this post:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |